Hurd/dmesg

GNU Mach 1.3.99
AT386 boot: physical memory from 0x0 to 0x1fff0000
GNU Mach 1.3.99
AT386 boot: physical memory from 0x0 to 0x1fff0000
Enabling FXSR
pcibios_init : BIOS32 Service Directory structure at 0xfc180
pcibios_init : BIOS32 Service Directory entry at 0xfc190
pcibios_init : PCI BIOS revision 2.10 entry at 0xfc1e0
Probing PCI hardware.
ide: Intel 82371 PIIX3 (dual FIFO) DMA Bus Mastering IDE 
    Controller on PCI bus 0 function 9
    ide0: BM-DMA at 0xd000-0xd007
    ide1: BM-DMA at 0xd008-0xd00f
hd0: got CHS=522/255/63 CTL=0 from BIOS
hd0: VBOX HARDDISK, 4096MB w/256kB Cache, CHS=522/255/63, UDMA
hd2: VBOX CD-ROM, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
floppy0: no floppy controllers found
Failed initialization of WD-7000 SCSI card!
probing eata on 1f0
EATA0: address 0x1f0 in use, skipping probe.
probing eata on 1c88
probing eata on 2c88
probing eata on 3c88
probing eata on 4c88
probing eata on 5c88
probing eata on 6c88
probing eata on 7c88
probing eata on 8c88
probing eata on 9c88
probing eata on ac88
probing eata on bc88
probing eata on cc88
probing eata on dc88
probing eata on ec88
probing eata on fc88
probing eata on 170
EATA0: address 0x170 in use, skipping probe.
probing eata on 230
probing eata on 330
ppa: Version 1.42
ppa: Probing port 03bc
ppa: Probing port 0378
ppa: Probing port 0278
scsi : 0 hosts.
scsi : detected total.
eth0: PCnet/PCI II 79C970A at 0xd020,  8  0 27 8c 66 7d
pcnet32.c:v0.99B 4/4/98 DJBecker/TSBogend.
rtl8139.c:v1.23a 8/24/2003 Donald Becker, becker@scyld.com.
 http://www.scyld.com/network/rtl8139.html
via-rhine.c:v1.16 7/22/2003  Written by Donald Becker <becker@scyld.com>
  http://www.scyld.com/network/via-rhine.html
0 3c515 cards found.
eth1: D-Link DE-600 pocket adapter: not at I/O 0x378.
D-Link DE-620 pocket adapter not identified in the printer port
Found PCnet/PCI at 0xd020, irq 10.
eth1: PCnet/PCI-II 79C970A at 0xd020,  8  0 27 8c 66 7d assigned IRQ 10, no DMA needed.
lance.c:v1.14 2/3/1998 dplatt@3do.com, becker@cesdis.gsfc.nasa.gov
Partition check (DOS partitions):
 hd0: hd0s1 hd0s2
Linux PCMCIA Card Services 3.2.8
  kernel build: 2.0.36 
  options:  [pci]
PCI routing table version 1.0 at 0xfc500
Intel ISA/PCI/CardBus PCIC probe:
  no bridges found.
ds: no socket drivers loaded!

xirc2ps_cs.c 1.31 1998/12/09 19:32:55 (dd9jn+kvh)
^Mmodule 0: ext2fs --readonly --multiboot-command-line=${kernel-command-line} 
                   --host-priv-port=${host-port} --device-master-port=${device-port} 
                   --exec-server-task=${exec-task} -T typed ${root} $(task-create) $(task-resume) 
^Mmodule 1: exec /hurd/exec $(exec-task=task-create)
^M2 multiboot modules task loaded: ext2fs --readonly